Weldcote Metals

Standard Replacment Lens. Package of 1Size:  Shade:   Material:  Poly Carbonate Package:  1For Use With:  Standard Fixed Shade Welding Helmet

Weldcote Metals UTLTRAVIEWLI is a replaceable inner lens for the ULTRAVIEW series of welding helmets 5 lenses in each package. Package of 5Size:  Shade:   Material:  Poly Carbonate Package:  5For Use...

WELDCOTE 56CF is a cadmium free silver brazing alloy with a narrow melting range and the lowest working temperature in the cad-free family yielding premium flow, wetting, ductility, penetration. WELDCOTE 56CF is commonly used to join any combinations of...

ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale, produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for...

ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale, produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for...

Weldcote Metals DEOX Copper is a 98% copper filler metal used for MIG, TIG and oxyacetylene welding of copper and copper-alloyed base metals. DEOX copper contains small amounts of phosphorus and silicon which act as the deoxidizing agents to promote...

ER70S-6 contains higher levels of manganese and silicon than the other standard grades of MIG wire. This wire features excellent tolerance of rust and scale, produces the highest deposit strength of all the carbon steel MIG wires. ER70S-6 is used for...

This replacement shade 10 glass filter lens is for use with all welding helmets that have a 2" x 4-1/2" viewing area. Package of 1Size:  Shade:   Material:  Glass Package:  1For Use With:  Standard Fixed...

Weldcote Metals 4043 (commonly referred to as AlSi5) is a 5% silicon aluminum filler metal that is available in spools or cut lengths for MIG or TIG processes. This alloy is recommended for welding 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355,...

Weldcote Metals 316L has the same analysis as ER316, except that the carbon content is limited to a maximum of 0.03% in order to reduce the possibility of formation of intergranular carbide precipitation. This filler metal is primarily used for welding...

Weldcote Metals R60 is used to produce high tensile strength quality welds on low carbon and low alloy steels such as sheets, plates, pipes of grade A and B analysis and structural shapes. It is recommended for critical welds that must respond to the...